How to Resolve Canon B200 Error in Windows PC

  • A Canon B200 error indicates that the printer’s print head is malfunctioning.
  • Sometimes the printer can give you a false error and you can fix it.
  • Reinstall the print head and replace the problem cartridges with the correct cartridges.
  • The printer should then start up and all that is left to do is check the nozzles, do a deep cleaning, and level the printer.

Updated February 2024This tool will stop these errors and fix common problems: Get it at this link
  1. Download and install the software.
  2. It will scan your computer to find problems.
  3. The tool will then correct the issues that were discovered.

Support Code B200 Canon Printer

In its simplest form, the B200 error indicates that the print head is malfunctioning. Print heads are important because they are responsible for distributing ink from cartridges on to the paper. It is common for printer heads to be problematic, especially those that are cheaper.

Support Code B200 Canon Mx922

B200 is a Canon printer error that occurs often on Canon MX922. It typically indicates a faulty print head, which is responsible for distributing ink from the cartridge to the paper. Furthermore, the Canon B200 error can also be caused by an incompatible printer driver, an incorrect cartridge, or obstructions.

The Canon printer driver for Windows 10/8.1/8/7/Vista/XP can help you fix problems that result from Windows Updates. Here are the top 2 methods for updating the Canon printer driver.

You may be unable to print until you clear the Canon printer error b200. Let’s take a closer look at its causes so we can better understand this error. 

Several users were unable to use their Canon printer lately since they saw the error on their computers. This is a hardware-related error. It indicates a malfunctioning print head, but sometimes it is a false error.

My Pixma ix6820 threw this code a few hours ago. First thing I did was clean the heads. Fortunately, it is a snap removing the head tray from this printer. I had watched a bunch of YouTube videos on how to clean the heads on Canons, so I kinda knew what to expect. At any rate, I feel confident that I cleaned the heads properly. I might should have waited a little longer than I did before reinstalling them, but I made sure at least that the head tray’s exterior was completely dry. Anyway, reinstalled it, and I’m still looking at the blinking lights — 10x blinks means B200. So, I pull the head tray again to make sure there wasn’t a misalignment or anything. Really, installation is dead simple and I don’t see how anybody could get it wrong. So I reinstalled the head tray the only way it looks like it will fit. Again, the 10x blinks.  Sigh.  

Hello:
I just want to say that I solved my Canon B200 error through this thread, and I signed up just to say “Thank you!” I have a Canon MX892 Multi-Printer, only about 18 months old (new cost about $350 now). I ran ink low, and got the error. I worked on all solutions found on the internet for the past week. Finally, I took it in to the repair shop, our local Cartridge World, left it overnight for inspection, and the guy said it was junk. Well, I was going to keep the old printer, since I decided to buy a good used Canon MX892, and then I could use the brand new inks I just bought for $50, and perhaps the print head. I sent my friend back to pick it up, and he came back with the printer and inks, but not the print head, so I sent him back for that, as well. I decided to soak print head one more time overnight in alcohol. This morning, I once again replaced all inks in the printer and the print head, and still B200 error.

Let’s get to the bottom of this Canon b200 error by discussing all possible causes and solutions.

What is the cause of the Canon B200 error?

Open the Control Panel by clicking on Start.

It is essentially a sign that there is a problem with the print head when a B200 error occurs. Ink is distributed from cartridges to paper through the print head, so the print head is a crucial component of the printer. Especially in low-cost printers, print heads are notoriously problematic.

How to troubleshoot a Canon B200 error?



Updated: February 2024

We highly recommend that you use this tool for your error. Furthermore, this tool detects and removes common computer errors, protects you from loss of files, malware, and hardware failures, and optimizes your device for maximum performance. This software will help you fix your PC problems and prevent others from happening again:

  • Step 1 : Install PC Repair & Optimizer Tool (Windows 10, 8, 7, XP, Vista).
  • Step 2 : Click Start Scan to find out what issues are causing PC problems.
  • Step 3 : Click on Repair All to correct all issues.

download




Obstructions should be inspected

  1. The printer should be turned off, the paper removed, and any obstructions checked.
  2. You should remove any obstructions before turning on the printer.

Replace the problem cartridges

If this is your problem, replace the cartridges with the correct ones, and check your printer’s manual for detailed instructions. Ensure that the cartridge you choose is compatible with your printer.

Reinstall the print head

  1. You may resolve the B200 error by reinstalling the print head. You will need to turn off the printer after reinstalling the print head.
  2. If the problem persists, try turning the printer back on.

Press the Power and Copy buttons

  1. While simultaneously pressing Power and Copy, hold down both buttons.
  2. As soon as the printer starts, it needs to be checked for nozzles, cleaned thoroughly, and leveled.



RECOMMENATION: Click here for help with Windows errors.

Frequently Asked Questions

A Canon b200 printer error can appear on your device due to a paper jam. The same error occurs when the paper block or paper path is jammed.

  1. Reset the printer settings.
  2. Remove any obstructions.
  3. Clean the print head.
  4. Clean the print head manually.
  5. Remove old ink.
  6. Reinstall the printer drivers.
  7. Try a new ink cartridge.

  1. Turn the printer on.
  2. Hold down the Stop/ Reset button.
  3. Press and hold down the button you are using to make a color copy.
  4. Wait 5 seconds.
  5. The printer will restart and set up.
  6. Press OK and let the printer do its work.
  7. You have reset the printer settings.

Canon provides us printer with the excellent quality that helps us by offering multi-services.  However, some error codes moment to time happen in the canon printer and also disrupt the aid of the canon printer Error B200 is likewise an error which we can see happening in the canon printer.  So, here, we will discuss how to solve this error B200 in a canon printer by which we could again enjoy the perfect service of the canon printer.  One can also take support from Canon Printer Support to repair any sort of canon printer difficulty.  By dialing the Canon Printer Support amount, you can talk with the expert team of Canon Printer Support.

Website | + posts

Mark Ginter is a tech blogger with a passion for all things gadgets and gizmos. A self-proclaimed "geek", Mark has been blogging about technology for over 15 years. His blog, techquack.com, covers a wide range of topics including new product releases, industry news, and tips and tricks for getting the most out of your devices. If you're looking for someone who can keep you up-to-date with all the latest tech news and developments, then be sure to follow him over at Microsoft.