- The Blue Screen of Death (BSOD) error with FAT FILE SYSTEM (fast fat.sys) restarts the operating system to prevent further damage to the system.
- Download and install the software.
- It will scan your computer to find problems.
- The tool will then correct the issues that were discovered.
In the event of a Blue Screen of Death (BSOD) indicating an error relating to the FAT FILE SYSTEM (fastfat.sys), the system is restarted to prevent further damage. Windows 10 FAT File System Error occurs when your Windows operating system is outdated, your device drivers are outdated, your system files are corrupted, your drives are corrupted, your anti-virus software is false positive, and your Windows is corrupted. To resolve this error, follow the steps below.
If the operating system encounters a Blue Screen of Death (BSOD) with the fast fat file system, it restarts in order to prevent further system damage. There are a number of causes of the FAT FILE SYSTEM ERROR in Windows 10. These include outdated operating systems, outdated device drivers, corrupt system files, corrupt disks, conflicting security/folder encryption applications, false anti-virus triggers, and corrupt operating systems. The following solution can be used to fix this error.
The genuine Fastfat.sys file is a software component of Microsoft Windows Operating System by Microsoft Corporation.”FastFAT.sys” is Microsoft’s driver used by Windows operating systems for accessing storage on devices that use File Allocation Table organization instead of the NTFS disk storage organization used by Windows NT. This includes floppy disks, USB flash drives, and most digital cameras. “FastFAT.sys” is in “C:\Windows\System32\drivers” and the system loads it using an API called IFS (Installable File System). By moving FAT driver logic outside the kernel into 32-bit PE executables, Microsoft achieved massive optimization, thus the “FastFAT” name. Booting with USB flash drives attached can sometimes cause BSOD’s attributed to FastFAT.sys; removing them may resolve the problem.
What causes FAT file system error in Windows 10?
Drivers for the Fast FAT File System are found in the file Fastfat.sys. You can check if you need to update your Fastfat driver by clicking here. Generally, drivers enable internal components, including graphic cards and drives, as well as external devices, like printers, backup media and input devices.
The following causes of FAT file system errors in Windows 10 have been identified through a thorough analysis of various cases.
Outdated Windows: If your system’s operating system is not updated, it has various flaws that can lead to many types of errors, including the most common one.
Damaged system disks: If there are damaged sectors on the system’s hard drive, the system’s ability to read and write to the hard drive will be severely compromised, which can lead to the current error.
Faulty hardware: If any part of the hardware is faulty, the system may display the current error.
Outdated device drivers: Outdated device drivers can cause many problems with the system, including a FAT file system error in Windows 10.
Damaged system files: System files are necessary for the normal functioning of the system, and if the files required by the system are corrupted, you will suffer from the current problem.
Conflicting folder protection applications: These applications use encryption methods that conflict with the system’s hard drive. And if critical system files are corrupted/restricted, you may suffer from the current problem.
Anti-virus false positives: Anti-virus applications have been known to block access to necessary system files because they detect these files as malware, and these false positives can cause the system to generate the current error.
Corrupted Windows installation: Corrupted Windows installation can lead to many BSOD errors on the system,] including the current problem.
How to fix FAT file system error in Windows 10?
Updated: April 2024
We highly recommend that you use this tool for your error. Furthermore, this tool detects and removes common computer errors, protects you from loss of files, malware, and hardware failures, and optimizes your device for maximum performance. This software will help you fix your PC problems and prevent others from happening again:
- Step 1 : Install PC Repair & Optimizer Tool (Windows 10, 8, 7, XP, Vista).
- Step 2 : Click Start Scan to find out what issues are causing PC problems.
- Step 3 : Click on Repair All to correct all issues.
In the future, if you experience a BSOD on Windows 10, be sure to look at the stop code and apply some general fixes in order to fix it.
Updating Windows drivers
Usually, fat_file_system errors are caused by corrupt or incompatible drivers. Follow these instructions to resolve the issue.
- Use the context menu to open Device Manager by right-clicking the Start button.
- Click Update Driver on the right-click menu when you have located the driver you want to update.
- You can also try contacting the device manufacturer if Windows does not find the latest driver for your device.
- You can try uninstalling the device by right-clicking it and selecting Uninstall. Hit Restart to have Windows reinstall the driver automatically.
Check for defective hardware
In Windows 10 file system errors, defective hardware can also cause problems. If you suspect that your computer’s hardware is defective, remove it immediately.
- Check to see if the computer is stuck in a reboot cycle, and if it is not, you must identify the defective hardware by disconnecting all devices connected to it except the boot drive, keyboard, and mouse.
- If you receive an error, the defective hardware will be detected once you have connected the devices you just removed.
- Testing the defected hardware on a computer that may be working normally should reveal if it is damaged and should be replaced.
Check the hard drive for bad sectors
When a FAT file system error occurs, you can check if the disk contains damaged sectors. Unfortunately, bad sectors can result in a large number of computer errors, including 0xc0000185 boot configuration error, FAT file system error, Windows installation error, and 0x80300024 error.
In order to perform this, you are going to need a third-party program that has a “surface check” feature.
Run Driver Verifier to find the problem drivers
There are many types of errors associated with device drivers, including errors related to the FAT file system. They are the bridge between your operating system and your hardware. If there are any configuration errors, corruptions, or compatibility issues with the device drivers, then you will see many errors on your computer.
Here are the steps to run the driver check, which is part of Windows, to determine whether or not your drivers are working properly.
- Follow the on-screen instructions to navigate to the computer repair page. Select Troubleshooting – Command Prompt from the Troubleshooting section on the screen.
- Press Enter after entering a checkmark in the pop-up window.
- Choosing Create Defaults from the Driver Verifier Manager page will result in the defaults being created.
- Click Finish, then Windows will automatically search for errors. If you are asked to restart your computer, do so. After selecting Automatically select all drivers installed on this computer, click Finish.
- It will scan your computer’s drivers for problems after it restarts. If anything is found, you will be notified.
Fixing file system errors
The Stop Code Fat File System error is also caused by a corrupted file system. It is therefore possible to fix the problem by fixing the file system errors, which can be accomplished with a third-party program. Third-party programs are safe and reliable to use. As well as booting from the bootable media, you must fix the file system errors.
RECOMMENATION: Click here for help with Windows errors.
Frequently Asked Questions
How do I fix a FAT file system error?
- Update your Windows and drivers.
- Run the BSOD troubleshooter.
- Run an SFC scan.
- Run a DISM.
- Try to boot your computer with only one hard drive.
- Make sure your hardware is working properly.
- Uninstall your folder protection and blocking software.
- Remove your antivirus software.
What is Fastfat?
Fastfat. sys is a driver for Windows. A driver is a small program that allows your computer to interact with connected hardware or devices. This means that the driver has direct access to the internal components of the operating system, hardware, etc., and therefore can directly interact with them. A free file information forum can help you determine if Fastfat.
What are the causes of file system errors?
The most common causes of file system corruption are incorrect startup or shutdown, hardware errors, or NFS write errors. Hardware errors can be a faulty unit on the hard drive, a faulty hard drive controller, a power failure, or an accidental system shutdown.
Can system recovery recover corrupted files?
System Restore, by definition, only restores files and settings on your system. It does not affect documents, photos, videos, batch files, or other personal data stored on your hard drives. You do not need to worry about files that may have been deleted.
Mark Ginter is a tech blogger with a passion for all things gadgets and gizmos. A self-proclaimed "geek", Mark has been blogging about technology for over 15 years. His blog, techquack.com, covers a wide range of topics including new product releases, industry news, and tips and tricks for getting the most out of your devices. If you're looking for someone who can keep you up-to-date with all the latest tech news and developments, then be sure to follow him over at Microsoft.
