How to resolve the error 0x000000C2

  • Shutdown errors are sometimes called blue screen (or) black screen errors.
  • These errors can be caused by software and hardware issues and can be difficult to resolve.
  • To fix the 0x000000c2 shutdown error in Windows, you will diagnose the problem by testing common causes such as RAM, hard drive, and temperature.
Updated February 2024This tool will stop these errors and fix common problems: Get it at this link
  1. Download and install the software.
  2. It will scan your computer to find problems.
  3. The tool will then correct the issues that were discovered.

Windows Blue Screen Bad Pool Caller

Blue screen bad pool caller 0x00000c2 is a Windows error that occurs due to invalid registry entries and incorrectly configured system settings. bsod bad_pool_caller 0x00000c2 error is an identical error that is also known for its bug check error code 0x00000c2. This error mainly occurs when software requests the system for resources that are not available. There are lots of symptoms of bluescreen bad pool call 0x00000c2 including computer runs sluggish, freezing, the computer gets shut down without any warning and many others. Here below, we have discussed some causes that lead to an error like blue screen bad pool caller 0x00000c2.

Windows Stop Code Bad Pool Caller

A bad pool caller is also known as BAD_POOL_CALLER, or 0x000000C2 (or 0xC2).

Bad Pool Caller Windows 11

An invalid pool request has been made by the current thread, as indicated by STOP code 0x000000C2.

Windows 10 and Windows 8 users will experience blue screen error 0x000000C2. Follow these steps to resolve this issue.

The error code 0x000000c2 has been causing constant BSoDs (Blue Screen of Death) for a number of users. As a result, this particular issue appears to occur on Windows 7, Windows 8.1 and Windows 10. The majority of affected users report the crashes appear to occur randomly with no apparent cause.

A shutdown error can be referred to as a blue display error, a black display error, and can occur on any version of Windows, including Windows 10/8/7. These shutdown errors can result from both software and hardware malfunctions.

A blue screen is displayed with error code 0x000000c2 for users of Windows 7, Windows 10, and Windows 8.1. Microsoft decided to collect information on the problems on the forum to figure out how to fix it. It is most likely that the error is caused by damage to the system files, poor memory, AMD Quick Stream technology, or AMD Anti-Virus conflict. We will take a closer look.

It is usually caused by low-level software or hardware failures that cause a critical error of 0x000000c2, from which Microsoft Windows cannot recover. By testing common causes such as RAM, hard drive, and temperature, you will be able to diagnose the problem and fix the 0x000000c2 shutdown error. A virus scan, a hard drive cleanup, or a repair installation may be necessary depending on the problem.

What is the cause of error code 0x000000c2?

What is the cause of error code 0x000000c2?

Windows 7 Bad Pool Caller

This blue screen error code problem is a blue screen error also called as the BSOD error code problem. This error mostly occurs on the windows (O.S.) operating system. It is a bug check has a value of 0x000000C2. This blue screen of death error can be caused by the many software, driver, firmware & the hardware error reasons. This Blue screen error has become a major issue for the Windows users especially nowadays. It includes the system PC freezes, crashes & possible virus infection too. This BAD_POOL_CALLER error indicates that the KERNEL-Mode process or the driver incorrectly attempted to perform the memory operations.

Software or hardware malfunctions can be caused by incorrect or corrupted system files. The command prompt provides an option to scan for corrupted files and repair them.

The error message we encountered was investigated by taking a look at several user reports and the most commonly used fixes for this problem. This particular error can be caused by a number of different scenarios. Here is a short list of possible culprits:

AV Conflict – It turns out that this particular problem can occur when two third-party antivirus packages are simultaneously installed on your computer. In many cases, this leads to a conflict that results in this particular BSOD error. If this scenario applies, you can solve the problem by uninstalling one of the security packages that are part of the conflict.

This Stop 0x000000c2 Error Code problem is the error problem which appears on a blue screen after you install any new antivirus or the software on your PC. From this, you are seeing and experiencing this error code problem again and again on your PC. This Stop 0x000000c2 error indicates that the blue screen caused by a damaged hard disk. It is a prevalent error problem occurred mostly in the windows (O.S.) operating systems PC. It is a type of cooling problem too. This is a type of BAD_POOL_CALLER error issue too. This Stop 0x000000c2 error is a B.S.O.D. (Blue Screen of Death) problem. This error includes the system PC freezes, crashes & the possible virus infection. This is a very annoying error too that has faced by the many users. This Stop 0x000000c2 error is also caused by the hexadecimal formatting error too.

You don’t have to worry if you’re a Windows 8 user, experiencing the bad pool caller error 0x00000c2. A simple step by step guide is provided below on how to resolve the error.

AMD’s Quick Stream technology is at the root of the crash – software developed by AMD is often cited as being responsible for this particular crash. Quick Stream technology is a non-essential third-party utility that is known to be the cause of this particular error. In this case, you should be able to solve the problem by uninstalling this particular software.

It is quick and easy to get rid of this Stop error 0x000000c2 windows 7 code issue if you restore recent changes.

BSOD caused by Advanced System Care – This software is an absolute BSOD magnet. Error 0x000000c2 is just one of the problems that have been proven to be caused by this software. If you like this tool, try to upgrade to the latest version, as the developer has released bug fixes that should fix the problem. Otherwise, the only solution is to remove it from your computer.

Bad memory – As several users have confirmed, this problem can also be caused by bad RAM. If you think the problem is caused by a bad USB drive, you can check it with Windows Memory Diagnostic. If your suspicions are confirmed, you will need a new USB flash drive to fix the problem.

Damaged system files – Damaged system files are one of the most common causes of this particular error code. If this scenario applies to you, you can try to fix it by using the System Restore Utility, fixing the corruption with DISM or SFC, or performing a restore installation.

How to fix error code 0x000000C2?



Updated: February 2024

We highly recommend that you use this tool for your error. Furthermore, this tool detects and removes common computer errors, protects you from loss of files, malware, and hardware failures, and optimizes your device for maximum performance. This software will help you fix your PC problems and prevent others from happening again:

  • Step 1 : Install PC Repair & Optimizer Tool (Windows 10, 8, 7, XP, Vista).
  • Step 2 : Click Start Scan to find out what issues are causing PC problems.
  • Step 3 : Click on Repair All to correct all issues.

download



How to fix error code 0x000000C2?

Restore files and system settings on your Windows PC

  1. Start by clicking on Start
  2. In all programs, you can find “System Restore”
  3. You can restore your system by clicking “System Restore.”.
  4. Start the wizard by clicking the following button
  5. That’s all there is to it.

If you restore your last changes, you will be able to remove Win 7 “Stop error 0x000000c2” error code quickly and easily.

Clear the cache with Windows disk cleaner.

  1. Run the menu.
  2. Disk Cleanup can be found here by searching or clicking on it.
  3. You can clear disk drives by selecting them
  4. Running the program is as simple as clicking “OK”.
  5. That’s all there is to it.

Windows code 0x0000c2 Windows 10 can be fixed and resolved by clearing the cache.

Disconnect the Windows hardware you just installed.

You can fix this problem by disconnecting your newly installed hardware, if you recently logged into your PC and added new hardware.

Restore the system files using the sfc /scannow command in CMD on your PC.

  1. It is necessary to insert the installation disk for Windows OS.
  2. Start by clicking on Start.
  3. The command line can be found by typing cmd (command line).
  4. Open it by clicking it
  5. To run the command, run “sfc/scannow”.
  6. Press Enter
  7. Your computer needs to be rebooted.
  8. That’s all there is to it.

This error can be fixed by running sfc/scannow from the command line.

Reinstall and update the Windows bug drivers on your PC.

  1. Start by clicking “Start”.
  2. “Device Manager” can be found through a search or by clicking on it.
  3. If you notice an error sign on the driver, right-click it.
  4. The device driver can be updated by clicking “Update Device Driver.”.
  5. You will receive an update shortly
  6. That’s all there is to it.

This Windows error code 0x000000c2 can be quickly and easily fixed by reinstalling and updating drivers.

I hope that this will certainly help to eliminate the 0x000000c2 stop error code that causes the blue screen windows on your computer to malfunction.



RECOMMENATION: Click here for help with Windows errors.

Frequently Asked Questions

  1. Turn off your computer by pressing and holding the power button, then wait and press again to turn it on again.
  2. On the next screen, select Troubleshooting, then Advanced Options -> Startup Settings.
  3. Select the Restart button.
  4. This time, when your computer restarts, you can choose how you want it to boot.

Method 1: Run Windows diagnostics.
Method 2: Run System File Checker (SFC) and Disk Checker (CHKDSK).
Method 3: Run Memtest86+.
Method 4: Run/run automatic repair.
Method 5: Run CCleaner to fix registry errors.
Method 6: Restore Windows 10 installation.

BAD POOL CALLER is a deadly blue screen error that is often caused by hardware or software incompatibilities, driver errors, or overclocking.

When Windows realizes that something might cause real damage, it stops everything, resulting in the infamous Blue Screen of Death. BSOD can be a symptom of a hardware problem. In this case, it may be that the problem was caused by the bug itself. Although BSOD does not damage your hardware, it can ruin your day.

Website | + posts

Mark Ginter is a tech blogger with a passion for all things gadgets and gizmos. A self-proclaimed "geek", Mark has been blogging about technology for over 15 years. His blog, techquack.com, covers a wide range of topics including new product releases, industry news, and tips and tricks for getting the most out of your devices. If you're looking for someone who can keep you up-to-date with all the latest tech news and developments, then be sure to follow him over at Microsoft.