- Can’t open the network connection properties on your computer? If the answer is yes, then there is nothing else to worry about.
- Just follow the instructions in this article and the problem will be solved quite easily.
- If you are also affected, here are some troubleshooting tips to help you fix this error in Windows 10.
- Check the DNS server address and check the DNS address of the following DNS server in the Preferred or Alternate DNS server field field field.
- Download and install the software.
- It will scan your computer to find problems.
- The tool will then correct the issues that were discovered.
A network adapter driver may not be up-to-date, or the configuration of the network may be incorrect.
Having trouble opening the network connection properties on your computer? If so, you don’t have to worry about anything else. Just read this article to resolve the problem. You can solve your problem with minimal effort by using these easier workarounds before moving on to the actual solution.
In Windows 10, sometimes you need to check your network settings when things don’t work properly. You may receive the following error message if you try to open the “Network Connections” properties after you recently updated your device – An unexpected error has occurred. You can investigate this error and fix it here.
Invalid Ip Address
If you assign an invalid IP address to the DS, it will not be able to access your network. Various devices and operating systems (including Windows ) discard network packets referring to invalid IPs automatically.
If you are also affected, here are some troubleshooting tips from Techquack to help you fix this error in Windows 10.
What causes Ethernet properties error: an unexpected error occurred
I receive the following error when running the EthernetIP Capacity Tool:
A user can change the network adapter configuration, enable protocols, and disable them by using the Internet Properties feature. However, when opening the Ethernet network adapter’s properties, some users have reported an Unexpected error occurred message.
Local Area Connection Doesn T Have A Valid Ip Configuration
You may receive the error message: Local Area Connection does not have a valid IP configuration if your network adapter driver is outdated or corrupted. To fix the error, you may need to reinstall your network adapter driver. Here’s how to do it:
Here are some troubleshooting tips to help you fix this “Unexpected Error” error message on Windows 10. If you are also experiencing this issue, check out these troubleshooting tips.
To fix the “Ethernet properties: an unexpected error occurred” error
Updated: April 2024
We highly recommend that you use this tool for your error. Furthermore, this tool detects and removes common computer errors, protects you from loss of files, malware, and hardware failures, and optimizes your device for maximum performance. This software will help you fix your PC problems and prevent others from happening again:
- Step 1 : Install PC Repair & Optimizer Tool (Windows 10, 8, 7, XP, Vista).
- Step 2 : Click Start Scan to find out what issues are causing PC problems.
- Step 3 : Click on Repair All to correct all issues.
When prompted to do so, click on “Ethernet” under “Change adapter settings”. You can also choose the “Diagnose” option to have Microsoft Windows fix any errors and fix the adapter if necessary. It also enables and disables the network adapter to fix any faults. Once you encounter the errors, you will need to fix them and have the Ethernet cable recognized by the PC.
Depending on the problem you’re experiencing, you might try another IPv6 setting on your router. For example, disable shared IPv6 connections on an Apple Airport router. This will allow IPv6 and IPv4 traffic to work together. First, select a 6to4 tunnel in the router’s settings. People have reported that disabling Share IPv6 connections on an Apple Airport router resolves IPv6 connectivity issues on local devices.
Remove and reinstall the network adapter
- “Run” can be accessed by pressing Windows + R.
- The Device Manager will open as soon as you open devmgmt.MSC by typing it and clicking OK.
- The Network Adapters section in Device Manager can be found by expanding it.
- Select Remove Device from the right-click menu of Network Adapters.
- Click Uninstall when prompted.
- Device Manager will display a list of Actions after you have uninstalled the program.
- To find out if there have been any hardware changes, click Scan.
- The network adapter will now be added to the list after Windows scans for hardware changes.
- See if any improvements need to be made in the internet properties.
Using this screen, you can view Ethernet properties, check the status, and make changes to the adapter. If you do not see your changes saved, try again a few times.
Updating the Ethernet adapter driver
- You can access the Device Manager by clicking Start, then entering your device type.
- The Network Adapters section in Device Manager can be found by expanding it.
- Select Update Driver from the right-click menu of the Ethernet adapter.
- Check for updates automatically in the new window.
- As soon as it detects an upcoming driver update, Windows will download it from the Internet.
- Restart your computer to see if the improvements have been made after the installation.
When Windows updates are applied, compatibility issues may occur with Ethernet adapter disks that have been updated.
Disable IPv6
- You can open the Run program by pressing Windows + R.
- Control Panel can be accessed by entering control and clicking OK.
- You can find it in the Control Panel under Network and Internet.
- Adapter settings can be changed by clicking the Change Adapter Settings button in the left pane.
- The Ethernet adapter’s properties can be accessed by right-clicking it.
- Scroll down to the Network tab and uncheck Internet Protocol Version 6 (TCP/IPv6).
- Your changes will be saved when you click OK.
- Restart your PC after closing Control Panel.
- The Ethernet adapter must be restarted before you can view its properties.
- If you are making changes, ensure that they are error-free.
Check the DNS server address
- Select Control Panel from the Start menu by typing Control in the search box.
- You can access the Network and Sharing Center by going to Network and Internet.
- Adapter settings can be changed by clicking the Change Adapter Settings button in the left pane.
- The Ethernet network adapter can be viewed by selecting the Properties option when you right-click it.
- The Internet Protocol version 4 (TCP/IPv4) should be opened in a separate window.
- In the Preferred or Alternate DNS server field, select Use the following DNS server addresses.
8.8.8.8
8.8.84.4 - Your changes will be saved when you click OK.
- If you can now access the Internet, see if the problem has been resolved.
Here’s how to fix DNS problems in Windows 10 quickly. If the error remains, follow the steps above.
RECOMMENATION: Click here for help with Windows errors.
Frequently Asked Questions
How do I change the Ethernet properties?
- For a Wi-Fi network, select Wi-Fi -> Manage Known Networks. Select the network for which you want to change the settings, then select Properties.
- For Ethernet, select Ethernet, then select the Ethernet network you are connected to.
How do I find the Ethernet properties?
- Click Start, then Control Panel. In Control Panel, select Network and Internet, and then click Network and Sharing Center in the menu that appears.
- From the menu on the left, select Change adapter settings.
- Select Internet Protocol version 4 (TCP/IPv4) and click Properties.
How do I reset the Ethernet adapter?
Right-click the network adapter icon and select Disable. Wait a few seconds, then right-click the icon again and select Enable. This will force your Ethernet adapter to reboot.
How do I fix my Ethernet connection in Windows 10?
- Check for viruses.
- Check your drivers.
- Make sure the connection is enabled.
- Check your network cable.
- Check your connection credentials.
- Run the Internet connection troubleshooter.
- Reset the network adapter driver.
- Disable the firewall and VPN software
Mark Ginter is a tech blogger with a passion for all things gadgets and gizmos. A self-proclaimed "geek", Mark has been blogging about technology for over 15 years. His blog, techquack.com, covers a wide range of topics including new product releases, industry news, and tips and tricks for getting the most out of your devices. If you're looking for someone who can keep you up-to-date with all the latest tech news and developments, then be sure to follow him over at Microsoft.