System recovery Error 0x800700b7 (fixed)

  • Error 0x800700b7 error can occur during system recovery during Windows 10.
  • This post shows how to fix system recovery error with solutions.
  • Error means that an unspecified problem has occurred that prevents the application, in this case, rstrui (System Restore), from restoring the system to the previous restore point.
  • Running third-party antivirus, corrupted system files, outdated version of Windows 10 are some of the reasons that can cause this error.
Updated March 2024This tool will stop these errors and fix common problems: Get it at this link
  1. Download and install the software.
  2. It will scan your computer to find problems.
  3. The tool will then correct the issues that were discovered.

Fix System Restore Error 0x800700B7: If you use Windows Backup and Restore then you may have faced the error “System Restore did not complete successfully” accompanied by an error code 0x800700B7. Error 0x800700B7 means an unspecified error has occurred which is preventing the System Restore program to run. While there is no particular cause of this error but after researching it’s safe to assume that it can be caused because of antivirus software conflicting with the system, or corrupt registry entries or system files because of 3rd party software, virus or malware etc.

0x800700b7 error can occur during system recovery. This post shows how to fix system recovery error 0x800700b7 with solutions. In addition, you can also visit Techquack to find other system recovery problems and solutions. Error 0x800700b7 means that an unspecified problem has occurred that prevents the application, in this case, rstrui (System Restore), from restoring the system to the previous restore point.

In this error message, Windows says that it couldn’t complete the requested changes, which appears to be a problem with certain Windows components.

If an antivirus program or firewall (third party) prevents the system from restoring the program to safe/immutable files, this error is usually caused. This error usually occurs when the antivirus program or firewall (third party) denies the program access to the files. In general, corrupted system files, registry, or other problems can also cause the error message, since it is “Unspecified”.

Provisioning Failure 0x800700b7

It is a clear indication that your system is having trouble finding the drive on which your game was originally installed, often accompanied by the error message “Provisioning failure 0x800700b7.” A heavy game may also indicate that your Windows device lacks storage space to install it.

Secondly, you can temporarily disable or uninstall your antivirus software to fix system restore error 0x800700b7.

Whenever Windows 10 encounters a problem, System Restore helps restore it to its previous stable state. There are times, however, when System Restore fails, and an error message appears. The error usually appears with an error code. The purpose of this post is to discuss an error like error 0x800700b7, its possible causes, and some solutions to solve it.

Running third-party antivirus, corrupted system files, outdated version of Windows 10 are some of the reasons that can lead to error 0x800700b7. To get rid of this problem, download/install the latest version of LCU, disable/enable it. Remove third-party antivirus programs and run SFC or Disk Utility. If the problem persists, try booting in safe mode or clear the task cache via the registry. In many cases, you may not even be able to access the login screen. In such scenarios, you need to go to WinRE, rename the Windows Apps folder, and then simply run the system restore.

Several users have found success in removing or sterilizing registry task caches with this method in this guide.

Causes of error code for Windows 10 0x800700b7.

Causes of error code for Windows 10 0x800700b7.

Several factors can interfere with Windows 10’s system recovery process, including the following:

  • The system recovery process is interfered with by a third-party antivirus program or malware program.
  • A conflicting registry key may also cause this problem.
  • This error can also be caused by damaged, corrupted, or infected system files.
  • Computers may also display this error if they are shut down incorrectly.
  • The program failed/was not completed.

In order to fix this issue, you must eliminate all factors that can cause Windows 10 system recovery errors. Also, if you can’t back up and restore your system because of an error code 0x800700b7, do not worry. Just read the entire article carefully and follow the instructions on how to fix this issue without getting in touch with a professional.

How to fix system recovery error 0x800700b7?



Updated: March 2024

We highly recommend that you use this tool for your error. Furthermore, this tool detects and removes common computer errors, protects you from loss of files, malware, and hardware failures, and optimizes your device for maximum performance. This software will help you fix your PC problems and prevent others from happening again:

  • Step 1 : Install PC Repair & Optimizer Tool (Windows 10, 8, 7, XP, Vista).
  • Step 2 : Click Start Scan to find out what issues are causing PC problems.
  • Step 3 : Click on Repair All to correct all issues.

download



How to fix system recovery error 0x800700b7?

Complete installation of the pending software

Install all recently downloaded software completely by opening all installers and selecting full installation options. Don’t forget to open all software installers but install them completely, too.

It is possible that some programs did not fully install the optional software components. If this is the case, reinstall those programs.

Perform a system file scan

Using the SFC will repair corrupted system files. It searches for corrupted files and repairs them.

  1. Start the command line by pressing Windows + X, then select Command Prompt (Admin).
  2. Once you’ve typed “sfc /scannow”, press Enter.
  3. To begin scanning, press Enter. It should take less than 30 minutes to complete the scan.
  4. Windows Resource Protection recovered the corrupt files if it recovered them. If it recovered any files, it will say, “Windows Resource Protection successfully recovered this file.” Reboot Windows if it found any corrupt files.

Run the Check Disk utility.

  1. Click the File Explorer button on the taskbar to open the Check Disk utility for repairing a corrupted file system.
  2. Open the Properties window directly below the hard drive icon by right-clicking the drive icon in File Explorer.
  3. On the Tools tab, click the “Scan” button.
  4. After clicking “Check Disk”, a scan will begin.
  5. Some corrupted entries can be fixed by checking the disk. Rebooting Windows might also be necessary in this case.

Restore Windows 10 to Safe Mode.

Here’s how to restore Windows in safe mode if system recovery works in Safe Mode. System Restore can also be performed in Safe Mode if it works in Safe Mode.

  1. Click on the Start menu and then click the Power key.
  2. Restart the computer while holding down Shift.
  3. When Windows restarts, Advanced Boot Options are displayed. Click Troubleshooting, then Advanced Settings.
  4. When you are ready to restart, click Restart in the Startup Settings section.
  5. Safe Mode can be started by pressing the 4 key.
  6. You can open the Create Restore Point window by typing “System Restore” into the Cortana search box.
  7. The next window will open once you click “System Restore.”.
  8. By clicking Next, you can choose to restore from a different point in time.
  9. Click Next and Finish when you have selected a system restore point.

Disable antivirus software

Files marked as sensitive may not be accessible by system recovery software if you have third-party antivirus software installed.
Error 0x800700b7 can also be resolved by disabling antivirus software.

Removing cache key from registry tasks

You can open the registry editor by pressing Win + R, typing “regedit” in the text box, and clicking OK. This should fix error 0x800700b7 for some Windows users.

  1. In the registry, find the NTCurrentVersionScheduleTaskCache key under HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindows.
  2. To export TaskCache, right-click and choose Export from the context menu after saving the registry key.
  3. A backup file can be named, selected, and saved by clicking the Save button.
  4. Next, navigate to HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindows NTCurrentVersionScheduleTaskCacheTreeMicrosoftWindows in the registry editor.
  5. Choose Delete from the context menu when you right-click the Windows key.
  6. The registry editor will close when you click Yes to confirm.
  7. Computers should be restarted.


RECOMMENATION: Click here for help with Windows errors.

Frequently Asked Questions

Method 1: Remove installation utilities / disable turbo mode.
Method 2: Enable Microsoft software virtual copy service.
Method 3: Enable system restore via Group Policy Editor.
Method 4: Use the registry.

  1. Click Start, then Computer.
  2. This error can occur because the recovery partition is enabled for file backup or system restore and is almost full.
  3. Also, try rebooting your computer in selective boot mode with protection disabled.
  4. Type services in the Start menu search box and press Enter.
  5. Reboot the repository.

It is used to solve problems such as unstable operation, frozen reactions, and other PC system problems. System Restore does not affect your documents, images, or other personal data, but it does remove applications, drivers, and other programs that were installed after the restore point was created.

If your Windows OS is not working properly due to errors in hardware drivers, faulty applications, or startup scripts, Windows System Restore may not work properly when the operating system is running normally. Therefore, you may need to start your computer in Safe Mode and then try to perform Windows System Restore.

Website | + posts

Mark Ginter is a tech blogger with a passion for all things gadgets and gizmos. A self-proclaimed "geek", Mark has been blogging about technology for over 15 years. His blog, techquack.com, covers a wide range of topics including new product releases, industry news, and tips and tricks for getting the most out of your devices. If you're looking for someone who can keep you up-to-date with all the latest tech news and developments, then be sure to follow him over at Microsoft.