Resolving Windows 10 closes all applications when you go to sleep or hibernate mode

  • Windows 10 shuts down all apps when it goes to sleep or hibernate mode.
  • Microsoft suggests that adjusting your computer’s display settings can prevent your laptop from shutting down after you close the lid.
  • You may encounter this problem because a recently installed update has changed the system settings, or the power plan settings have been corrupted.
  • You can also access the troubleshooter by opening a command prompt, then typing the following command, and pressing Enter.
  • Run Power Troubleshooter to adjust your computer’s power settings.
Updated February 2024This tool will stop these errors and fix common problems: Get it at this link
  1. Download and install the software.
  2. It will scan your computer to find problems.
  3. The tool will then correct the issues that were discovered.

Hibernating Windows 10

If you have taken a long break from your screen, you can continue working where you left off with hibernation, preserving energy and battery life. With Windows 10, you can activate and deactivate hibernation by going to the power settings. Check out the following tutorial to find out how to change Windows 10’s hibernation settings.

In Windows 10, the sleep mode is problematic in the sense that it wakes up even if you can put it in sleep mode. It doesn’t stay in sleep mode as expected when you put it in sleep mode before using it.

If you want to take a break for fresh air, you probably put your computer to sleep. You can also retract the screen on your laptop to put it into sleep mode, and the computer will “wake up” automatically when you do. Once you’re ready, you simply open your laptop and hit the periodic key to reactivate it. It’s time to keep working, but it’s not over yet.

Several of you say that your computer has a very unpleasant hibernation mode when Windows is on, which means that all applications are closed, then your computer goes into hibernation mode, as if it was just rebooted.

This means that you can lose all the documents that you have, documents that you didn’t save. So, in this Techquack article, we’re going to share some ways to fix Windows 10 by shutting down all the apps that are waiting or hibernating by mistake!

Hibernate Vs Sleep Laptop

Two computer modes that require distinguishing are sleep mode and hibernate, which are often used synonymously but are not in fact the same thing. Sleep mode is an energy-saving state that allows activity to resume when fully powered. Hibernate mode is also meant to be power-saving but differs from sleep mode in what is done with your data. Sleep mode stores the documents and files you are operating into the RAM, using a small amount of power in the process. Hibernate mode essentially does the same thing, but saves the information to your hard disk, which allows your computer to be turned off completely and use no energy. When you turn your it back on, your hard drive allows your work to be brought right back to where you left off. Hibernate is mainly meant for laptops and is best used in the event you are not planning to use your computer for a long period but want to keep your work up.

 

Why Windows 10 shuts down all apps when it goes to sleep or hibernate mode

Why Windows 10 shuts down all apps when it goes to sleep or hibernate mode

If you’re using a laptop, use the drop-down menu under Battery mode under Settings > System > Power & sleep to disable sleep mode.

Using display drivers, you can communicate with the operating system, the graphics architecture of the computer, and the display. You may experience unexpected shutdowns of your laptop and your PC if your drivers are incorrectly configured, corrupt, or outdated.

There is no battery on a desktop PC, so if power is cut, the computer will automatically shut down. Unless there is a risk of a power outage – such as in an electrical storm – you can use sleep mode on a desktop PC.

As a result of sleep mode, your computer consumes less energy and turns off its display when you aren’t using it. You can set your computer in Sleep mode instead of shutting it down completely and rebooting it so that it will resume where you left off when you wake it up. It is important to note, however, that you can secure your computer by shutting it down.

Your laptop will not shut down after you close the lid if you adjust its display settings. When you sleep or wake up, your laptop behaves differently depending on the settings you set. In the Windows search box, type “Power and Sleep Settings.”

It may be caused by a recent system update, a corrupt power plan setting, or a conflict with a third-party application.

Sleep Mode In Windows 10

Select Settings > System > Power & Sleep from the Start menu, then sleep settings. You can set your device to turn off the screen after a certain number of minutes under “Screen.” When your device is not in use, set how long it should wait before going to sleep under “Sleep.”

 

To restore Windows 10, which disables all applications when it goes to sleep or hibernate mode



Updated: February 2024

We highly recommend that you use this tool for your error. Furthermore, this tool detects and removes common computer errors, protects you from loss of files, malware, and hardware failures, and optimizes your device for maximum performance. This software will help you fix your PC problems and prevent others from happening again:

  • Step 1 : Install PC Repair & Optimizer Tool (Windows 10, 8, 7, XP, Vista).
  • Step 2 : Click Start Scan to find out what issues are causing PC problems.
  • Step 3 : Click on Repair All to correct all issues.

download



Often, when I wake up my computer after it goes to sleep or I put it to sleep, all the open applications are closed. I looked hard at the power settings and couldn’t find anything, but it doesn’t seem like Windows Update has installed any updates or restarted. Anyway, my apps shouldn’t be shut down by hibernating.

To restore Windows 10, which disables all applications when it goes to sleep or hibernate mode

Troubleshooting the power supply

It may be necessary to run the power supply troubleshooter first in order to resolve this issue.

Your computer’s power settings can be adjusted by running Power Troubleshooter, a tool that automatically fixes some common power supply problems. The troubleshooter checks your computer’s timer settings, which determine how long it waits before turning off the screen or sleeping. Your computer’s battery life can be extended by adjusting these settings.

After restarting the laptop, all the folders and apps open as expected. This only happens when it is put into sleep or hibernation for too long.

Here’s how:

  1. Enter Troubleshooting by clicking Start.
  2. The Troubleshooting Options option will appear in the results.
  3. You can then follow the directions on the screen by scrolling down and clicking Power.

By typing the following command and hitting Enter, you can also access the troubleshooter.

The PowerDiagnostics command is: MSDT.exe /id

The screen will instruct you to click Next.

Work SFC and DISM

Troubleshooters cannot resolve the problem. SFCs and DISMs can be used if the troubleshooter has not been able to resolve it.

This article will demonstrate how to fix the hybrid sleep error by allowing apps to continue to run but at the lowest power consumption possible while the computer is sleeping. However, if the feature is turned off, it results in the error we are trying to fix.

Follow these steps:

Use a text editor like Notepad to paste the following command.

@echo de
Date/time/date
Cleanup-Images /StartComponentCleanup Dism /Online /Cleanup-Images
A component cleanup can be started by dism /online /cleanup-image /startcomponentcleanup
echo…It is also important to note the time and date
Remove Echoes, go online, restore health, clean up the image
The dismounting of the computer, going online, cleaning the images, and restoring the health
echo…
It is also important to note the time and date
SFC echo / scan
SFC / scan
The time and date are both /t
break on

Put a .bat file extension on the file and name it SFC_DISM_scan.bat.

Once your computer stops reporting errors, you can restart it and see if the issue has been resolved by running the batch file several times with administrator rights.

Deactivate the hybrid hibernation pool

There is a possibility that the hybrid inhibitors mode has been disabled, which can be restored. Here is how:

  1. Enter control in the Run dialog box by pressing Windows + R.
  2. Hardware and Sound can be found by clicking here.
  3. Power options can be selected.
  4. The power plan settings for your PC will appear based on what you are currently using.
  5. Go to Advanced power settings and select it.
  6. The section Hibernate can be hidden now by clicking the plus sign next to it.
  7. To enable hybrid power saving mode, turn on the battery and connectivity settings.
  8. After that, click Hibernate After and select Never for On Batteries and Never for Connecting.
  9. You can now click OK after clicking Apply.

As soon as the problem is resolved, you can check to see if it persists. If it persists, you should identify and remove all the latest updates installed on your PC.

 



RECOMMENATION: Click here for help with Windows errors.

Frequently Asked Questions

This could be caused by changes in system settings, corrupted power plan settings, or conflicts with third-party applications. Try getting the power troubleshooter to work. The troubleshooter automatically fixes some common power plan problems. Run the power troubleshooter to adjust your computer's power settings.

This problem may be caused by a corrupted system file. I recommend running System File Checker. System File Checker (SFC) is run to check for corrupt system files that may be causing this problem. When prompted, type sfc / scan now and press Enter.

When the computer shuts down, all open programs are closed and the computer shuts down the operating system. A turned-off PC uses almost no power. Hibernate mode: When the PC is in hibernation mode, it goes into power-saving mode. The PC's state is stored in memory, but the rest of the PC is turned off and consumes no power.

To disable the close button of a selected window, press Ctrl+1 to temporarily enable or disable it. If you want the changes to be permanent, press Ctrl+2 instead to add the program to the rules.

Website | + posts

Mark Ginter is a tech blogger with a passion for all things gadgets and gizmos. A self-proclaimed "geek", Mark has been blogging about technology for over 15 years. His blog, techquack.com, covers a wide range of topics including new product releases, industry news, and tips and tricks for getting the most out of your devices. If you're looking for someone who can keep you up-to-date with all the latest tech news and developments, then be sure to follow him over at Microsoft.