How to Resolve System Restore Error Code “STATUS_WAIT_2” in Windows PC

  • The “STATUS_WAIT_2” error occurs when some Windows users try to back up their system image using system restore.
  • In some cases, this error is accompanied by error code 0x80070002.
  • This problem is reported in Windows 7, Windows 8.1, and Windows 10.
  • It turns out that several different causes can cause the error.

Updated March 2024This tool will stop these errors and fix common problems: Get it at this link
  1. Download and install the software.
  2. It will scan your computer to find problems.
  3. The tool will then correct the issues that were discovered.

When you encounter on-screen problems on your Windows OS, you tend to get frustrated. This is especially true when you don’t know how the problem happened. The Windows operating system can occasionally display an error code 0x80070002 during the backup process. We will examine the various symptoms associated with Windows backup error 0x80070002, as well as alternate scenarios of how these symptoms may arise. Then, we will discuss how to fix Windows backup error 0x80070002.

Some Windows users get the “STATUS_WAIT_2” error when trying to backup their system image using system restore. This error may also be reported with error code 0x80070002.

System Restore Did Not Complete Successfully Windows 10 0x80070002

When Windows 10 displays the error code 0x80070002, it indicates a specific program file or service had failed to load during the restore process. Essentially, you’ll need to uninstall that particular program, reboot your computer, and then restore it. To fix it, follow the 6 steps listed below.

System Restore Failed While Deleting The Following File/directory

It is also possible that corrupt system files contributed to the failure of System Restore. To fix the problem, you can run SFC to determine and repair the corrupt system files.

0x80071ac5

Choosing another restore point is the most straightforward way to fix a System Restore failed error. The point you chose could have become corrupted, preventing you from completing the restore. Therefore, you are eliminating that possibility by using a different restore point.

This error may occur if the system protection settings are corrupt. To resolve this issue, follow these steps to verify that the system protection settings are in order.

Several factors can contribute to STATUS_WAIT_2 errors. We will examine each solution’s process description.

What causes the system recovery error code ‘STATUS_WAIT_2’?

  • Corruption of low-level files.
  • System recovery is inconsistent.
  • An error has been reported in Windows 10.
  • Operating system degradation.

How to repair the system recovery error code ‘STATUS_WAIT_2’?



Updated: March 2024

We highly recommend that you use this tool for your error. Furthermore, this tool detects and removes common computer errors, protects you from loss of files, malware, and hardware failures, and optimizes your device for maximum performance. This software will help you fix your PC problems and prevent others from happening again:

  • Step 1 : Install PC Repair & Optimizer Tool (Windows 10, 8, 7, XP, Vista).
  • Step 2 : Click Start Scan to find out what issues are causing PC problems.
  • Step 3 : Click on Repair All to correct all issues.

download



For your Windows 10 PC to work with System Restore, you can try Clean Boot. These are the steps to follow:

Removing Windows update files

  1. You can open the command field by pressing the Windows key and R at the same time.
  2. You must accept the UAC warning if it appears. Type “MSC” into the command field and click OK.
  3. Select Stop from the Services Control Panel by right-clicking on Windows Update.
  4. The “C:/Windows” directory can be found by opening Windows Explorer.
  5. Your computer must be restarted after you delete the “Software Distribution” folder.

Using the CHKDSK utility

  1. Invoke the command line, but with administrator privileges.
  2. Press Enter once you have typed “chkdsk/f/r”.
  3. Next time you reboot, press Y, and then enter to run CHKDSK.
  4. You will need to restart your computer after closing the command line interface.
  5. The next step would be to restore the system.

Starting an SFC scan

  1. Using the command line (Admin), open the command line with administrator privileges.
  2. Then press Enter to run “SFC/scannow”.
  3. Your computer can be restarted after an SFC scan has been performed.
  4. The system restore can be re-run after the boot process has been completed.



RECOMMENATION: Click here for help with Windows errors.

Frequently Asked Questions

The "STATUS_WAIT_2" error occurs when some Windows users try to create a system image backup using System Restore. In some cases, this error is accompanied by error code 0x80070002.

  1. Windows 10 error.
  2. Damaged low-level files.
  3. Damage to the operating system.
  4. Inconsistency during system recovery.

  1. Press the Windows + R keys to open a command field.
  2. Type "MSC" in that field and click OK. Note the UAC warning and accept it (if it appears).
  3. Now right-click on the Windows Update option in the Services Control Panel and select Stop.
  4. Open Windows Explorer and navigate to the "C:\NWindows" directory.
  5. Find the "Software Distribution" folder, delete it and restart your computer.

System Restore Could Not Access A File

You may need to temporarily disable an antivirus program on your computer before using System Restore to access a file.

Status Wait 2

Visit More Information About Case Processing Times for more information about reading your receipt notice, finding your form, category, and office.

Recently, a user told us that his Windows 7 PC ran quite slowly after upgrading to Windows 10 and he wanted to restore his system. But when he clicked the System Restore option in Troubleshoot, an error message appeared:

Website | + posts

Mark Ginter is a tech blogger with a passion for all things gadgets and gizmos. A self-proclaimed "geek", Mark has been blogging about technology for over 15 years. His blog, techquack.com, covers a wide range of topics including new product releases, industry news, and tips and tricks for getting the most out of your devices. If you're looking for someone who can keep you up-to-date with all the latest tech news and developments, then be sure to follow him over at Microsoft.