- The “page corrupted by faulty hardware” error (Windows stop code 0x0000012B) covers several different hardware problems.
- A single-bit error occurs when a single bit (a tiny piece of data) changes incorrectly during a data transfer.
- The error can also be caused by an outdated, incorrect, or corrupt system driver.
When you experience a Blue Screen of Death, technically called a stop error, it’s always a bad experience. You lose your work or other data when your computer crashes without warning. One such critical error that can strike without warning is the corrupted page error caused by faulty hardware.
It is never an enjoyable experience for Windows users to experience the “blue screen of death,” a shutdown error. A critical error like “page corrupted by faulty hardware” can occur without warning, and you lose your work or other data.
“Page corrupted by faulty hardware” is a Windows stop code for a variety of hardware problems, but it refers to a single-bit problem. When a single bit (a tiny piece of data) changes incorrectly during data transfer, the error is called a single-bit error. Although it appears to be a minor issue, this can lead to faulty hardware and a “Faulty hardware – page damaged” error.
What are the causes of the “Faulty Hardware Corrupted Page” error?
- Hard drive damage or corruption
- The system partition does not have enough space.
- A new application or program has been installed
- Damaged system files can also cause BSOD errors.
- Corrupt files have been caused by a recent Windows update.
How to resolve the “Page corrupted due to hardware failure” error message?
We highly recommend that you use this tool for your error. Furthermore, this tool detects and removes common computer errors, protects you from loss of files, malware, and hardware failures, and optimizes your device for maximum performance. This software will help you fix your PC problems and prevent others from happening again:
Updated: April 2024
Faulty Hardware Corrupted Page Meaning
In Windows 10, you may encounter a blue screen error called faulty hardware corrupted page. The error may cause your system to go into a boot loop, crash, or cause other problems. To prevent any further damage to your Windows 10 PC, you need to fix it right away. For more information, continue reading this blog.
You can run the Windows System File Check (SFC) on your Windows installation files if your hardware is faulty and causing a corrupted page stop code.
Launch the RAM and SFC checks
- You can type mdsched.exe by pressing the Windows logo key and executing the R key simultaneously on your keyboard.
- You will be prompted to restart your computer immediately after clicking Restart Now (which is recommended).
- After the check has finished (up to 15-20 minutes), wait for it to close.
- In the Command Prompt window, click on the Administrator button while holding down Windows logo and X keys.
- Use your keyboard to type sfc /scannow.
- Resolve the issue if it hasn’t already been.
Update the display driver
It is also possible that this error is caused by a corrupt, outdated, or incorrect system driver, so be sure to update all drivers that are outdated.
The BSOD was caused by several bugs in Windows 10. You can experience the same problem with your OS, but your hardware might be fine.
It may be necessary to perform a clean installation of Windows if the Blue Screen error persists.
Driver update software lets you update drivers automatically without having to spend time, patience, or computer skills updating them manually.
Disable Quick Start
- Your keyboard should have a Windows logo key. Select Control Panel from the menu.
- Power Options can be found following the large icons in the view window.
- The Power button can be customized by clicking the Choose What To Do button.
- To change non-current settings, click Change.
- Check Enable Quick Start (recommended) and uncheck it.
- You can exit the page by clicking Save Changes.
RECOMMENATION: Click here for help with Windows errors.
Frequently Asked Questions
How do I fix the “Faulty Hardware Corrupted Page” error message?
- Disable quick startup.
- Update the device driver.
- Reset the device driver.
- Remove the external devices.
- Run the System File Checker and DISM tool.
- Check the hard disk utility.
- Run the Windows Storage Diagnostic Tool.
- Clean up your computer.
How do I know if my hardware is corrupt?
Press Windows + R to open the Run window, type mdsched.exe, and press Enter. Windows will ask you to restart your computer. The check will take a few minutes. Once the check is complete, the computer will restart.
How do I check if my Windows 10 hardware is malfunctioning?
Run system file scan and restore (SFC): the sfc /scannow (system file check) command checks the integrity of all files in the protected operating system and replaces faulty, damaged, altered or corrupted versions with the correct ones if possible.
How to repair damaged hardware in Windows 10?
- Reboot your computer.
- Reinstall the hardware.
- Run SFC.
- Run the CHKDSK program.
- Check your drivers.
Mark Ginter is a tech blogger with a passion for all things gadgets and gizmos. A self-proclaimed "geek", Mark has been blogging about technology for over 15 years. His blog, techquack.com, covers a wide range of topics including new product releases, industry news, and tips and tricks for getting the most out of your devices. If you're looking for someone who can keep you up-to-date with all the latest tech news and developments, then be sure to follow him over at Microsoft.
