How to Repair Corrupted Bootres.dll on Windows 10

  • The corrupt bootres.dll file is located in the Windows folder and is part of the boot resources library.
  • L stands for “Dynamic Link Library” in Windows 10 system.
  • It is a file that can be shared by programs to run the registry registry.
  • If you also encounter a startup runtime error related to a corrupted bootre.dll, check out this troubleshooting guide to fix it.
  • You can also use the System Restore utility to restore your computer to its previous state.

Updated February 2024This tool will stop these errors and fix common problems: Get it at this link
  1. Download and install the software.
  2. It will scan your computer to find problems.
  3. The tool will then correct the issues that were discovered.

Windows 10 startup problems can be resolved by replacing corrupt bootres.dll files?

This error message is caused by a corrupted or missing DLL file recognized by Windows 10, called Bootres.dll. The Bootres.dll file is one of them. If Bootres.dll is not properly installed, the program will not run.

Windows 10 clients often encounter startup runtime errors caused by corrupt bootres.dll files in the Windows folder. If your bootres.dll files are corrupt, check out this guide for solutions.

What causes Bootres.dll corruption?

With the system restart tool, you can fix Windows 10 boot.

It is possible for the wrong order of the SrtTrail.txt file to cause a corruption of the bootres.dll file in Windows 10. If the wrong order of the bootres.dll in Windows 10 causes the corrupt bootres.dll file, the cause can also be detected by the Windows recovery environment command line.

Here’s how to fix bootres.dll errors in the next section. You should, however, recover data from an unbootable computer before proceeding further if you encounter bootres.dll corrupt Windows 10 error, since you cannot log into your operating system if you get it. This will prevent secondary data corruption caused by wrong operations.

How to recover a corrupted Bootres.dll file?

Updated: February 2024

We highly recommend that you use this tool for your error. Furthermore, this tool detects and removes common computer errors, protects you from loss of files, malware, and hardware failures, and optimizes your device for maximum performance. This software will help you fix your PC problems and prevent others from happening again:

  • Step 1 : Install PC Repair & Optimizer Tool (Windows 10, 8, 7, XP, Vista).
  • Step 2 : Click Start Scan to find out what issues are causing PC problems.
  • Step 3 : Click on Repair All to correct all issues.


Boot Critical File Corrupt Windows 10

A corrupted, modified or missing critical file in the boot sector is usually the cause of ‘boot critical file is corrupt’ errors.

With this process, you will be able to install updates as well as fix BSoD errors, slow response times, and other similar problems on your PC.

Wearables and other devices can unlock PCs using companion device framework APIs (CDF). As part of Windows 10, version 1709, Dynamic Lock introduced an inbox method that detects if a user is present and locks or unlocks the PC based on Bluetooth. The CDF Dynamic Lock APIs are no longer developed because of this, and because third party partners did not adopt it.

Perform a system restore

If you have a corrupted bootrec.dll, you can restore it to its previous state using the System Restore utility in Windows 10. If you want to perform this operation, you must have a system restore point created in the past so you can restore your computer to where it did not have the corrupted bootrec.dll problem.

  1. The automatic recovery mode of Windows should be activated.
  2. After starting the computer, hold the power switch down for about five seconds to turn it off forcibly when the manufacturer’s logo appears.
  3. You will need to press the power switch again in order to restart the computer.
  4. Repetition of this procedure should be done three to four times.
  5. It will automatically restart your computer.
  6. ‘Troubleshooting’ – ‘Advanced’ – ‘System Restore’ will now open.
  7. Select “Next” to open the System Restore window.
  8. A list of restore points with time and date signatures will appear on the next screen.
  9. Your computer should work at the point when it was last restored to a working state.
  10. Choosing the right option is the next step.
  11. You can now restore your computer to the selected point by following the instructions on the screen.
  12. You will no longer have to worry about the error after the recovery process is complete.

Perform a ChkDsk scan

Damaged or corrupted hard drive sectors can also be the cause of the problem with corrupt bootres.dll. Running the ChkDsk utility will scan your hard drive for problems and fix them if necessary.

  1. Switch to Windows Auto Repair mode and open the command line.
  2. The following command must be copied and pasted into the command line, followed by the Enter key:
    The command “chkdsk C: /f /x /r” will take you through the process.

C represents the drive on which Windows is normally installed on your computer. If you have Windows installed on another drive, replace C with the name of the drive in question.

Running a Startup Repair

Fortunately, many users have been able to fix the bootrec.dll error by running Startup Repair. Using Auto Repair mode helps you fix the error when you cannot start Windows.

  1. Switch to the Auto Repair mode in Windows.
  2. The first screen you see is the Troubleshooting page.
  3. To open the Advanced Options option, click Troubleshooting.
  4. Click the Advanced Options menu and select Boot Repair.
  5. You will now be able to launch the Boot Repair tool.
  6. Ensure that you follow the steps on the screen.
  7. You may need to wait a while for this to complete.

Resetting your computer

  1. Put Windows AutoRestore into action
  2. Select Troubleshooting from Auto Repair mode’s first screen.
  3. You can reset this PC by selecting Reset this PC on the next screen.
  4. If you select Save My Files from the Reset this PC screen, you will be given the option to leave your files intact or delete them all. Choose Save My Files from the Reset this PC screen and follow the directions.
  5. Reset the system after it has finished.
  6. The corrupt bootres.dll error on your computer will be permanently fixed once your computer is reset to factory settings.

RECOMMENATION: Click here for help with Windows errors.

Frequently Asked Questions

Bootres.dll is a Windows 10 Dynamic Link Library (DLL) file that is shared by programs. DLLs are Windows system files that are an important part of the registry. If the bootres file on your desktop or laptop computer is corrupt, you may get an error message that says: Program cannot be started because of bootres.

Learn more about bootres.dll. It is a DLL (Dynamic Link Libraries) file associated with the Windows operating system. It plays an important role in the Windows startup process, so any errors related to it can prevent your computer from starting.

  1. Run the built-in system file checker to replace missing or damaged operating system files.
  2. Run the DISM tool, restore the Windows system image, and repair the corrupted Windows component memory.
  3. Repair or reinstall the software if the application is causing this error.

  1. Run a third-party DLL fixer.
  2. Run the SFC scanner.
  3. Run DISM.
  4. Manually load DLL file.
  5. Install DirectX.
  6. Reinstall Visual C++ Redistributables.
  7. Disable or uninstall your antivirus program.
  8. Perform an onsite update.

Website | + posts

Mark Ginter is a tech blogger with a passion for all things gadgets and gizmos. A self-proclaimed "geek", Mark has been blogging about technology for over 15 years. His blog,, covers a wide range of topics including new product releases, industry news, and tips and tricks for getting the most out of your devices. If you're looking for someone who can keep you up-to-date with all the latest tech news and developments, then be sure to follow him over at Microsoft.