- Windows users get an error message that says, “The application did not start properly (0xc0150004) This error is not limited to one version of Windows.
- Users have reported this error on Windows 7, Windows 8.1, and Windows 10.
- To fix the error, follow all the steps described in this article.
- Error may be caused by your antivirus program, third-party programs, or corrupted system files.
Users have been experiencing a strange issue in which they have been unable to install or uninstall programs as a result of a weird error code, 0xc0150004. In fact, the issue does not seem to be exclusive to a particular version of Windows since it occurs on Windows 7, Windows 8.1, and Windows 10.
Windows operating system users complain about an error that prevents them from launching a windows application. Every time users try to install an installer, they get an error message that says, “The application did not start properly (0xc0150004).” This error is not limited to one version of Windows. Users have reported this error on Windows 7, Windows 8.1, and Windows 10.
There is a possibility that you will receive error 0xc0150004 when trying to start Windows programs. This means the application won’t open since it doesn’t have the system files for the operating system it needs to run. Windows can be reinstalled and the latest updates installed to solve this error most effectively, but if you don’t want to lose your data, you can try the following methods.
There are a number of reasons why Windows 10 error 0xc0150004 occurs. One of the most common is a corrupted or missing system file. Fortunately, Windows includes an in-built tool named System File Checker (SFC) that can diagnose and fix such file problems for you.
Whenever I try to launch Action!, I get the following error message: “The application could not start properly (0xc0150004)”. Click OK to close it. When I click OK, the error is resolved, but the program is stuck loading until I kill the task in Task Manager. Clicking OK closes the application itself.
Whether you are experiencing this annoying error on your Windows system or you are looking for a way to fix it, this article will help you.
Remote server has opened too many files. The Windows redirector should return this error only if there are too many open files.
If you are facing this error, here are some troubleshooting tips from Techquack to help you fix Windows application error 0xc0150004.
What is the cause of Windows application error 0xc0150004
Unsolved QuestionsThis Question
Krasimir Stamenkov Hi,I have purchased AVG Internet Security subscription, but the official installer I downloaded here does not work for me. The installation seems to proceed flawlessly, but when it finishes, there is no desktop or start menu shortcuts or taskbar icon. I started the installation as Administrator. I even used offline installer, but with no success. There is no error code or message. I try to install the product on Windows 10, Acer Predator laptop. Please help me to resolve the issue. I shall provide any additional information if required promptly. Thank you.
You need to sign in to do that.
Dismiss
Ask a question
If you have received this warning on your PC, it means that there was a malfunction in your system operation. Error code “0xc0150004” is one of the issues that users may get as a result of incorrect or failed installation or uninstallation of software that may have left invalid entries in system elements. Other potential causes may include improper system shutdown, such as due to a power failure, someone with little technical knowledge accidentally deleting a necessary system file or system element entry, as well as a number of other factors.
We investigated this particular problem by reviewing various user reports and testing various fix strategies that affected users have used to deal with this error code. It turns out that several scenarios can lead to 0xc0150004. Here’s a shortlist of possible culprits that could be responsible for this pesky configuration error:
- Overly protective AV package: According to several concerned users, this problem may well be due to an overly protective security package that restricts installation components. If this is the case, you can solve the problem by temporarily disabling the real-time protection (during software installation) or by getting rid of the security package completely.
- Third-party intervention: Another possible culprit is another third-party process (belonging to the file manager) that cannot be easily identified. In this case, a reliable way to detect process/service reactions is to start the computer in a clean state and systematically reactivate each disabled process to see which one is causing the problem.
- Damage to system files: Damage to system files is probably the most common cause causing error code 0xc0150004. If it is a classic corruption, a scan with some built-in utilities (SFC and DISM) should suffice. In more severe cases, it may be necessary to reboot all operating system components using a procedure such as a clean install or a repair install.
Follow these steps to fix the Microsoft Windows 0xc0150004 application error. This error can occur because of a virus, a third-party program, or a corrupted system file.
To fix error 0xc0150004 in Windows application
We highly recommend that you use this tool for your error. Furthermore, this tool detects and removes common computer errors, protects you from loss of files, malware, and hardware failures, and optimizes your device for maximum performance. This software will help you fix your PC problems and prevent others from happening again:
Updated: April 2024
There are a number of reasons why an application error 0xc0150004 could occur in Windows. Follow all the steps outlined in this article to resolve the error.
Use the DISM tool to repair Windows
- To use Windows, press Windows.
- CMD is typed in the command prompt, and the command prompt is run as administrator when you right-click it.
- You can run the following commands individually at the command prompt by typing them one by one and pressing Enter:
- You can view your past messages by selecting a protocol and then choosing the online option for cleaning up the image.
- Run the configuration that caused the error after launching the query. Make sure the error has been fixed before closing the query.
Make a clean boot
- Run can be opened by pressing Windows + R.
- Click OK after typing MSConfig.MSC.
- The Services tab can be found in the System Configuration window.
- To prevent accidental disabling of Microsoft services, select the Hide all Microsoft services checkbox.
- All third-party services can be disabled by clicking on the Disable All button.
- You can open Task Manager by clicking the Open Task Manager link in the Start tab.
- The Start tab can be found in the Task Manager.
- Choose each application individually and click Disable to disable it.
- You can save your changes by clicking Apply and OK in the System Configuration window.
- Restart the computer by clicking Restart Now when prompted.
- If the error persists, restart the system after installing new software or starting an application.
Disable real-time antivirus protection
- Installing launchers and apps may cause conflicts with third-party antivirus programs.
- If you still have problems, you can disable your antivirus program.
- Avast Antivirus users should follow these steps.
- The Avast Antivirus shortcut on the taskbar can be right-clicked.
- For 10 minutes, disable Avast Shields control.
- The antivirus program will be temporarily disabled.
- While you wait, you can try to run the application or installer that caused the error.
Installing Windows Updates
- Go to Settings by clicking Start.
- To update your security, click Updates.
- You will find Windows Updates when you click on it.
- Updates may be needed, so install them if they are pending.
RECOMMENATION: Click here for help with Windows errors.
Frequently Asked Questions
How do I fix a Windows application error?
- Reboot your computer.
- Update the .NET framework.
- Turn on administrator privileges.
- Reinstall the application or game.
- Update Windows.
- Run Chkdsk.
- Reinstall DirectX.
Why am I getting an application error?
The 0xc0000005 application error is wide and can be caused by a number of different problems. The error usually occurs when trying to start a program or application (as indicated by the error name). Some programs may have been updated or installed incorrectly, or the operating system may have been infected with malware or a virus.
How do I fix application errors in Windows 10?
- While holding down the "Windows" key, press "R".
- Type "Regedit" and press "Enter."
- Navigate to the next location.
- Open "AppInst_DLLs" and set it to blank.
- Reboot your computer.
What does “application error” mean?
Application errors are some of the most common computer problems you're likely to encounter, and some of the most annoying. Basically, it means that a program - technically called an application - has run into a problem and stopped.
Mark Ginter is a tech blogger with a passion for all things gadgets and gizmos. A self-proclaimed "geek", Mark has been blogging about technology for over 15 years. His blog, techquack.com, covers a wide range of topics including new product releases, industry news, and tips and tricks for getting the most out of your devices. If you're looking for someone who can keep you up-to-date with all the latest tech news and developments, then be sure to follow him over at Microsoft.
