Fixed Internet troubleshooting error 0x80300113

  • Error code 0x80300113 errors occur in Internet troubleshooter when connecting your PC to the network.
  • You can try connecting to the Internet by setting the correct time, date, and time zone, or copying the utility to your local drive.
  • The error message mostly appears a few minutes after restarting the computer.
  • If the error message still appears, then the problem is with the latest updates.
Updated April 2024This tool will stop these errors and fix common problems: Get it at this link
  1. Download and install the software.
  2. It will scan your computer to find problems.
  3. The tool will then correct the issues that were discovered.

Validating The Integrity Of The Troubleshooter Failed

In addition to the issue discussed in my German blog yesterday (see link above), another issue appears to prevent the upgrade to Windows 10 October 2018 Update (V1809). When developer mode is enabled, the update fails to install.

Have you ever encountered error code 0x80300113? If the answer is yes, then you’ve come to the right place. This Techquack post can help you fix this error because it will show you solutions. You can try connecting to the Internet by setting the correct time, date, and time zone, or copying the utility to your local drive.

Can you help me diagnose the problem if Windows Troubleshooter no longer works?

After restarting the system, the Internet connection usually works, but the connection problems usually reappear after a few minutes. Error code 0x80300113 occurs when users try to resolve problems with their Internet connection.

If you connect your PC to the network, did you encounter an error of 0x80300113 in the Internet troubleshooter? This error message appears shortly after restarting your computer. Many users are looking for a solution to this problem. The likely culprits will be discussed in this article, and you will see how you can fix it easily.

Interrupted Internet connection, incorrectly set time and date, disabled cryptographic services and corrupted system files are some of the causes that lead to 0x80300113 error in Internet troubleshooter. To resolve the issues, make sure that your system has the correct Internet connection without any interruptions. Setting the time and date correctly, activating stopped services, restoring corrupted system files with the SFC command, and resetting some registry entries are some of the possible solutions to this problem. If the error message still appears, then the problem is with the latest updates. Therefore, use the previously created system restore point to return to the previous stable state.


What is the cause of the error code 0x80300113 when troubleshooting?

What is the cause of the error code 0x80300113 when troubleshooting?

Can’t Run Troubleshooter Windows 10

Select Hardware and devices troubleshooter in the troubleshooting section under Troubleshooting. Press Windows + X, then select Control Panel. Select “View all items”, and then select “Hardware and devices troubleshooter”. 

The PC is not connected to the network: This error code may be caused when a user attempts to perform troubleshooting over the Internet without being connected to the network. In this case, Windows determines that the conditions for initiating this repair are not met, so this error code is issued. To fix this, simply connect to the network before running the utility.

How To Enable Windows Online Troubleshooting Service

Open the Local Group Policy Editor by pressing Windows + R, entering gpedit.msc, and clicking OK.

“Betrayal #fyp”. A TikTok video by Evee (@eveelaurynnxo) with 9K likes and 23 comments.

Time, date, or time zone does not match: It turns out that this particular problem can also occur when the time and date do not match. Many Windows utilities refuse to start when the system time and date do not match the server values. If this scenario applies, you can solve the problem by changing the time, date, and time zone of your PC to the correct values.


LOG: This bind starts in LoadFrom load context.WRN: Native image will not be probed in LoadFrom context. Native image will only be probed in default load context, like with Assembly.Load().LOG: Using application configuration file: C:\Program Files\Microsoft Visual Studio 8\Common7\IDE\devenv.exe.ConfigLOG: Using machine configuration file from C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\configmachine.config.LOG: Attempting download of new URL file:///C:/Program Files/MZTools2005/MZTools5.DLL.LOG: Assembly download was successful. Attempting setup of file: C:\Program Files\MZTools2005\MZTools5.dllLOG: Entering run-from-source setup phase.ERR: Error extracting manifest import from file (hr = 0x80131018).ERR: Failed to complete setup of assembly (hr = 0x80131018). Probing terminated.

The utility is stored on the mapped drive: If you have downloaded the troubleshooting utility from the official channel and are trying to run it from the mapped drive, this problem may occur due to a Windows limitation that prohibits running MS signed executable files that are not stored locally. In this case, you can solve the problem by copying the utility to a local disk and running it again.


How do you fix the error code 0x80300113

Updated: April 2024

We highly recommend that you use this tool for your error. Furthermore, this tool detects and removes common computer errors, protects you from loss of files, malware, and hardware failures, and optimizes your device for maximum performance. This software will help you fix your PC problems and prevent others from happening again:

  • Step 1 : Install PC Repair & Optimizer Tool (Windows 10, 8, 7, XP, Vista).
  • Step 2 : Click Start Scan to find out what issues are causing PC problems.
  • Step 3 : Click on Repair All to correct all issues.


I cannot connect to the Internet with my Dell laptop. I try to fix the issue using Windows Network Diagnostics, but I receive the message, “An unexpected error has occurred. The troubleshooting wizard cannot proceed.” You can see the error code 0x80300113 when you click “View Error Details.”

How do you fix the error code 0x80300113

Connecting to the Internet

In order for a troubleshooter to be able to provide you with a solution, you must be connected to the Internet while using any online convenience store or similar utility.

After running the utility, if error 0x80300113 occurs, check if you are currently connected to the network by clicking the network icon in the toolbar.

To run troubleshooting again, connect your computer to the network via Wi-Fi or Ethernet cable if it’s not already connected.

Scripts that don’t apply to your problem or don’t solve it should be skipped to the next.

Set the correct time, date, and time zone

Internet troubleshooting error 0x80300113 is usually caused by incorrect time and date settings. To resolve the problem and maintain a working Internet connection, you should first try resetting the time, year, and time zone to the correct values. Once the problem has been resolved, you can run Windows Internet Troubleshooter.

Your computer’s time, date, and time zone can be set with this quick guide.

  1. Once you have opened the “Run” dialog box, press the Win key + R keys. Type timedate.cpl into the text box and hit Enter.
  2. Changing the date and time is as simple as clicking the Change Date and Time button on the Date and Time tab.
  3. Set the appropriate time by selecting the appropriate date on the calendar and setting the appropriate time on the Time field.
  4. Select the correct time zone by clicking Change Time Zone on the Date and Time tab.
  5. Your computer needs to be restarted.

You can try the following method if you are still receiving error 0x80300113 after running Internet troubleshooter.

Copy the utility locally

In the case of Windows utility error 0x80300113, it means you are trying to run it from a mapped drive and the file is not locally saved. If this is the case, try copying the file locally.

Follow these steps to accomplish this.

  1. It is just a matter of cutting or copying the utility file from your mapped drive.
  2. Paste the utility file into File Explorer and save it to a local drive (C:/ works well).
  3. The utility can be opened after it has been saved to the local disk, but you need to be sure that the error 0x80300113 has been resolved.


RECOMMENATION: Click here for help with Windows errors.

Website | + posts

Mark Ginter is a tech blogger with a passion for all things gadgets and gizmos. A self-proclaimed "geek", Mark has been blogging about technology for over 15 years. His blog,, covers a wide range of topics including new product releases, industry news, and tips and tricks for getting the most out of your devices. If you're looking for someone who can keep you up-to-date with all the latest tech news and developments, then be sure to follow him over at Microsoft.